Polymers/Elastomers

In recent years foam-, rubber- and glue-materials have become more and more important for a large variety of industrial applications. Especially foams are widely used in the automotive industry because of their energy absorbing properties and the advantageous stiffness to density ratio. Compared to other commonly used materials as for example steel or aluminum, the material behavior of foams is much more complex. The modeling of foams for a finite element simulation therefore represents a challenging task for the simulation expert. Rubber- and Glue-Materials are in general non-linear elastic. Especially rubber materials show a very strong rate-dependent behavior, which has to be considered in the constitutive material formulation.

The program LS-DYNA offers its users a wide range of material models that have been developed exclusively for the modeling of foams and rubbers. The choice and the application of such special material models require a good basic knowledge of the theoretical as well as the numerical background.

It is the objective of this seminar to give an overview of the available material models for foams, rubbers and glues in LS-DYNA and on how to apply them properly. In addition to that the theoretical background of these models will be presented. Furthermore the topics parameter identification, experimental set-up and evaluation of experimental results will be discussed.

Small example problems will illustrate various application cases of the material models implemented in LS-DYNA.

 

Content:

  • Presentation of various applications
  • Discussion of the material behavior of polymers
  • Foams
    • Reversible, crushable and semi-crushable foams
    • Appropriate material models for LS-DYNA
    • Preparation of test results and assumption in LS-DYNA
  • Rubber Materials
    • Quasi-static and dynamic behavior
    • Incompressibility
    • Experimental set-up, data preparation
    • Parameter Identification
  • Glue Materials
    • Structural glue, installation glue, pane glue
    • Modeling of a glue line
    • Material behavior and material modeling of glue
    • Tests for the evaluation of material parameters
  • Thermoplastics
    • Material models for small deformations
    • Material models for large deformations
    • Experimental set-up, data preparation
    • Validation and verification
Dates
Dates Duration/days Registration Referee Language Location Fee
26.08.2019
2 days
S. Kolling
Gothenburg
12000 SEK

Lecturers

S. Kolling
S. Kolling

Referent des Seminars:
-     Modellierung von Polymer- und Elastomerwerkstoffen in LS-DYNA

Registration and Information

Registration and information

 

 

Contact
contact Mikael Schill
  • LS-DYNA
  • Material modeling
  • Forming Technology
contact Elizabeth Mäki Björklund
  • Sales Coordinator
  • Administration
0