x
Our website uses cookies. By using the website you agree ot its use. More information can be found in our privacy policy.

DYNAmore Nordic Newsletter: Issue 27 - December 14, 2016

DYNAmore Nordic Newsletter: Issue 27 - December 14, 2016

Office hours during Christmas and New Year 2016/17

 

We thank our customers for the trustful cooperation throughout the year 2016, and we wish all who read this a Happy Holiday and a healthy and prosperous New Year!

During the Christmas Holiday the office will have much reduced staffing from December 27 to 30. During those days support e-mails (support@dynamore.se) will be read once a day (at 15.00).

 



WEBinar LS-DYNA R9 - Presentations

Did you miss the WEBinar "LS-DYNA R9", or want to see the presentations again. You can download them here

 



Upcoming seminars 2017


The seminars for 2017 is up on our homepage, and the first ones out are:

Introduction to LS-DYNA Non-linear Implicit Analysis in LS-DYNA - January 18
This course presents a brief, practical introduction to the implicit capabilities in LS-DYNA with a focus on structural analysis.

Read more and register here

ANSA CFD meshing, intro course - January 31
ANSA is the leading multidisciplinary pre-processor for FE and CFD applications, with extremely powerful geometry handling and meshing capabilities. This course will give an introduction to CFD meshing, through demonstration and exercises.

Read more and register here


Introduction to LS-DYNA - February 1-3
The introductory seminar gives a quick, comprehensive introduction to the application of LS-DYNA and is recommended for simulation engineers who want to use LS-DYNA as an FE code to simulate general nonlinear problems. Prior knowledge is not required

Read more and register here

LS-PrePost - Geometry, mesh, and model creation - February 7
The pre- and post-processor LS-PrePost included with LS-DYNA has extensive postprocessing capabilities, but can also be used to build LS-DYNA models from CAD or for editing existing models.
This one day course covers the use of LS-PrePost for pre- and postprocessing. Particularly emphasis is put on pre-processing including a few exercises

Read more and register here

LS-DYNA, Simulation of sheet metal forming processes - February 7
This 3-day course is intended for people who want to use LS-DYNA for metal forming simulations. The course will cover how different aspects of metal forming processes are modeled in LS-DYNA and how to do this as accurate and efficiently as possible. The attendee will acquire deep knowledge in settings and techniques in several parts of LS-DYNA which will be beneficial for his/hers daily work and future applications.

Read more and register here

 



European LS-DYNA Conference 2017

The 11th European LS-DYNA Conference will be held 9 - 11 May 2017 in Salzburg, Austria. We cordially invite you to submit a presentation before 27 January.

 

 

We kindly invite all users of LS-DYNA, LS-OPT, and LS-TaSC to take advan­tage of this fantastic opportunity to showcase their work. The Conference is your chance to talk with industry experts, catch up with colleagues and enjoy time exploring new ideas

In addition, attendees can meet with exhibitors to learn about the latest hardware and software trends as well as additional services relating to the finite element solver LS-DYNA, the optimization codes LS-OPT and ­­LS-TaSC, and the pre- and postpro­cessor LS-PrePost.

Make sure that you will be part of the conference by submitting your abstract!

More on our homepage here
Call for Papers here
Submit abstract online here
Register here

 

 



Seminars 2017

Most of the seminar dates for 2017 are set, and you can read about them and register here
You can find a PDF-file to download here



Latest releases

LS-DYNA R9.0.1

 

LS-DYNA R7.1.3

 

LS-PrePost 4.3

LS-OPT V5.2.1

 

LS-TasC 3.1

 

ANSA v17.0.2

DYNAFORM 5.9.3

 

FormingSuite 2017

 

Oasys 13.1

Digimat 2016.1

 

Femzip 8.68